Joined in 2023 
82 
63 About this deal
The C7 figure 8 power lead is a 2 pin power cable, when viewed end on it looks like a number 8. Often found on small electrical appliances like radios and CD players. C13 to C14 Power Extension Cables Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it". The first edition of IEC 320 was published in 1970 [2] and was renumbered to 60320 in 1994. [3] Terminology [ edit ] For use in high-temperature settings (for example, electric kettle). Also used in some network appliances that provide PoE. On a standard power cord, the power is drawn from the mains and the electricity will run through the wire and arrive at its destination. This can be either into a power supply or directly into the appliance/machine itself. Due to the range of voltages available, different types of cable assemblies will suit varying requirements. What type of cable material is available?
Earthed – High temperature version of the IEC C13 – Used extensively in recent HP servers and Cisco kit Commonly known as a "figure-8", "infinity" or "shotgun" connector due to the shape of its cross-section, or less commonly, a Telefunken connector [21] after its originator. IEC - SC 23G Dashboard > Projects / Publications: Work programme, Publications, Stability Dates, Project files". www.iec.ch . Retrieved 2023-05-12. Power cords are used in almost every device or machine which requires electricity. From toasters and kettles, all the way up to generators and giant industrial equipment. Cable assemblies may vary in length, but the electrical current will perform at the same high capacity regardless of the distance it will need to travel.
What type of cable material is available?
IEC 60320-2-3: Couplers with a degree of protection higher than IPX0 [7] specifies couplers with some degree of liquid ingress protection (IP). In its second edition published in 2018, the standard sheets were moved to IEC 60320-3. IEC 60320-1 defines a cord set as an "assembly consisting of one cable or cord fitted with one plug and one connector, intended for the connection of an electrical appliance or equipment to the electrical supply". It also defines an interconnection cord set as an "assembly consisting of one cable or cord fitted with one plug connector and one connector, intended for the interconnection between two electrical appliances". UL certification E152635 covering YC-12 C13, YC-20 C15 and YP-32 C14 connectors. Note that the manufacturer's YC-20 label contains an error; the wire gauges (18, 16, 14) are repeated in the "current rating" column; the UL certification contains the correct values (10A, 13A, 15A). Retrieved 2014-09-24. This kind of coupler is used by Roland Corporation for a couple of synthesizer and drum-computer models (for example: TR-909, D-50) and by Revox for many older models of their hi-fi equipment (for example, A76, A77, A78, B77, B225). Was also used heavily on Marantz hi-fi equipment in the 1980s and 1990s. These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F).
There are many different types of power cables used with TVs and Computers, in this brief guide we show some of the more common power leads. C13 Power Cables (Kettle Leads)The C13 connector and C14 inlet are also commonly found on servers, routers, and switches. Power cord sets utilizing a C13 connector and an E interconnection plug are commonplace in data centers to provide power from a PDU (power distribution unit) to a server. These data-center power cables are now offered in many colors. Colored power cables are used to color-code installations. [25] C15/C16 coupler [ edit ] Very common on personal computers and peripherals. Commonly referred to as a "kettle cord" or "kettle lead", [17] [18] but kettles in countries using 120V require the C15/C16.
IEC 60320-2-1: Sewing machine couplers [6] specifies couplers which are not interchangeable with other couplers from IEC 60320, for use with household sewing machines. They are rated no higher than 2.5A and 250V AC. Similar to C13/C14 coupler, but unearthed. A C18 inlet accepts a C13 connector, but a C14 inlet does not accept a C17 connector. Interconnection cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug connector and one non-rewirable connector, intended for the interconnection between two electrical appliances".North American rating agencies ( CSA, NOM-ANCE, and UL) will certify IEC 60320 connectors for higher currents than are specified in the IEC standard itself. In particular, UL will certify: One of the most common plugs found on mainland Europe is the Schuko connector, used in France Germany and many other European countries. US Power Cables
Connectors are also classified according to the method of connecting the cord, either as rewirable connectors or non-rewirable connectors. CIE is one of the UK's leading and most innovative professional AV distributors and are widely accepted as the experts in commercial sound systems design and supply. The C15 is very similar to the C13 connector but has a groove between the 2 pins, this is known as a hot condition connector. Rated for higher temperatures than the C13. C5 Cloverleaf Power CablesIEC 60320-3: Standard sheets and gauges. [4] First published October 31, 2014, this part initially included the standard sheets for both appliance couplers and interconnection couplers. In a 2018 amendment, the standard sheets for the IP couplers defined by 60320-2-3 were added. [9] For appliance couplers the various coupler outlines are designated using a combination of letters and numbers, e.g., "C14". The connector supplies power to the appliance inlet. The appliance inlet is designated by the even number one greater than the number assigned to the connector, so a C1 connector mates with a C2 inlet, and a C15A mates with a C16A. Interconnection couplers have single letter designators, e.g., "F". They consist of a plug connector and an appliance outlet. The plug connector is the part integral with, or intended to be attached to, the cord, and the appliance outlet is the part integrated with or incorporated into the appliance or equipment or intended to be fixed to it, and from which the supply is obtained. Plug connector: "part of the interconnection coupler integral with or intended to be attached to one cord". Power cords are defined as any power cable which has had a connector installed prior to sale. There are versions that may have one connector and an unterminated end. Some assemblies may have a connector a plug. And some assemblies will even have 2 connectors (IEC lead extension). Depending on the application, there are various types to suit the needs. What are these cable assemblies used for?
Great Deal 
New Comment