Nikon ML-L3 Remote Control

Product Information

Use a smartphone or tablet to shoot – again, some Nikon 1 and COOLPIX models are compatible with the WU-1a/WU-1b wireless mobile adapters. With Apple devices, you'll have to perform this step each time you want to use the wireless feature of your Nikon camera with your smart device. The Sony a9 III is the world's first full-frame mirrorless camera to feature a global electronic shutter with simultaneous readout. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.

From a distance of 5 m (16 ft) or less, aim the transmitter on the ML-L3 at the infrared receiver on the camera and press the ML-L3 shutter-release button. When you select Tx or Rx, the display shows the corresponding functions for either receiving or transmitting. As a rule of thumb, go for JPG rather than NEF (RAW), and if you're shooting images that will only be displayed digitally, JPG Basic/medium or small will probably be a better option than JPG Fine.Then pair all WR-1 units to the same channel and/or group (as above) and set the transmitter to sync mode by selecting sync on the multi selector and pressing OK. For photographers using the D4 series, D810/A, D750, D7200 or D7100 cameras, the UT-1 communication unit will provide an ethernet connection going from the camera to a computer or FTP server.

The D750 has a 'Photo Shooting Menu > Remote Control Mode (ML-L3)' option, under which there are 4 options, Delayed remote, Quick-response remote, Remote mirror-up, Off (default). In flash modes that support red-eye reduction, the red-eye reduction lamp will light for about one second before the shutter is released. Go to your smart device's wi-fi settings and select the camera's wi-fi network or SSID in the list of networks displayed. Pair the WR-R10 and WR-T10 by turning on the camera, placing the two remote devices next to each other and pressing their grey pairing buttons simultaneously, until the red and green LEDs on the WR-T10 receiver flash on and off in sequence. Turn on the cameras and press the pairing buttons on the master camera and one of the remote cameras simultaneously, until the red and green LEDs flash in sequence.You can choose to send both RAW or JPEGs or send JPEG only, and you can also start and stop video wirelessly. Remote mirror-up Press ML-L3 shutter-release button once to raise mirror, again to release shutter and take photograph.

Use with the Nikon D40/D40X, D60, D70/ D70s, D80, D90, D5000, D5200, D3000, D3200, D3300, D5300, D7100, D600 and D610 digital SLR cameras, Nikon Coolpix P7100, P7700 and P7800 digital cameras and the Nikon 1 J1, J2, V1, V2 and V3. In PC mode, you can even shoot from the laptop, providing it's running Camera Control Pro 2 software. The Nikon ML-L3 Wireless Remote Control is a wireless shutter release capable of instantly triggering the shutter of select Nikons, without disturbing the camera, up to a distance of approximately 16' (4. In delayed remote mode, the self-timer lamp will light for about two seconds before the shutter is released. For those same cameras, the UT-1 used with the WT-5A will also enable high-speed image transfer over wireless LAN to a computer or FTP server.To pair units, press the menu button to display the menus, then highlight pairing in the link mode menu and press OK. It's ideal for group shots where you want to be in the picture, or for long exposures where you want to avoid the risk of shake from pressing the shutter button. The camera will not adjust focus continuously when continuous-servo autofocus is selected; note however that regardless of the autofocus mode selected, you can focus by pressing the camera shutter-release button halfway before shooting.

Wireless remote control, controls the shutter release of specific Nikon D-SLR, Nikon 1 and Nikon COOLPIX cameras from a distance.NB The letters A, B, C, D or E after the WT number indicates the number of channels available to the photographer, which varies across the world due to different regulations governing the use of wireless frequencies. If Record movies is selected for Custom Setting g1 ( Custom control assignment) > Shutter-release button, the ML-L3 can not be used when the live view selector is rotated to 1.